- BloodProST: prediction of blood-secretory proteins through self-training
- Influence of senescence on the sensitization potential of chemicals detected by local lymph node assays in aged mice
- Real‐time fetal brain and placental T2* mapping at 0.55T MRI
- Comparative study of radiofrequency heating in deep brain stimulation devices during MRI at 1.5 T and 0.55 T: Challenging the assumption of safety at low field strengths
- A correction for modeling radial, spiral, and PROPELLER dynamic contrast‐enhanced data: Time‐averaged extended Tofts
- Referenceless 4D flow MRI using radial balanced SSFP at 0. 6 T
- Quantitative susceptibility mapping of the human carotid artery: Assessing sensitivity to elastin and collagen ex vivo
- Effect of carbon content on electrical, thermal, and mechanical properties of pressureless sintered SiC ceramics
- Simultaneous 3D quantitative magnetization transfer imaging and susceptibility mapping
- Parallel detection of MRI and 1 H MRSI for multi‐contrast anatomical and metabolic imaging
- Motion‐corrected brain MRI at ultralow field (64 mT )
- Short‐term gradient imperfections in high‐resolution EPI lead to Fuzzy Ripple artifacts
- Regionally resolved cardiac metabolism using a dipole‐loop array coil for 7 T 31 P ‐ MRSI
- Unraveling the major role of vascular ( R2 ') contributions to R2 * signal relaxation at ultra‐high‐field MRI : A comprehensive analysis with quantitative gradient recalled echo in mouse brain
- Flexible, high spatial and temporal resolution absolute thermometry of MRI phantoms using ethylene glycol
- Feasibility of magnetic resonance elastography in the healthy rat heart
- T1234 : A distortion‐matched structural scan solution to misregistration of high resolution fMRI data
- Toward optimal inline respiratory motion correction for in vivo cardiac diffusion tensor MRI using symmetric and inverse‐consistent deformable image registration
- Concentrated salt water can partially replace sodium hydroxide in alkali activation of blast furnace slag
- Higher spatial resolution and sensitivity in whole brain functional MRI at 7T using 3D EPI accelerated with variable density CAIPI sampling and temporal random walk
- Monitoring the head exposure of MRI workers around 3 T, 7 T, and 11.7 T scanners using smart goggles equipped with a network of magnetometers
- High‐resolution, volumetric diffusion‐weighted MR spectroscopic imaging of the brain
- Er 3+ ‐doped amorphous tellurite thin films
- Resolution enhancement of 1 H NMR shifts in K‐struvite and newberyite via partial deuteration
- MR‐Cavitation Dynamics Encoded (MR‐CaDE) imaging
- Parametric study of sodium aluminosilicate glasses using the non‐reversing heat flow method of MDSC
- Reproducibility of tailored and universal nonselective excitation pulses at 7 T for human cardiac MRI : A 3‐year and an interday study
- In vivo 2 H ‐ MR spectroscopy and imaging of hepatic metabolic formation of trimethylamine‐N‐oxide
- B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping near metallic implants using turbo spin echo pulse sequences
- Influence of Al‐doped SrTiO 3 cores on hydrogen evolution from SrTiO 3 /TiO 2 core‒shell catalysts
- Repeatability‐encouraging self‐supervised learning reconstruction for quantitative MRI
- Quantitative multislice and jointly optimized rapid CEST for in vivo whole‐brain imaging
- Magnetization transfer imaging using non‐balanced SSFP at ultra‐low field
- Cerebrovascular reactivity differences in healthy cerebral gray and white matter
- Simultaneous quantification of PCr, Cr, and pH in muscle CEST ‐ MRI
- Simulated radiation levels and patterns of MRI without a Faraday shielded room
- Accelerated multi‐shell diffusion MRI with Gaussian process estimated reconstruction of multi‐band imaging
- A shielded 32‐channel body transceiver array with integrated electronics for 7 T
- Effects of the Cu coating thickness on the interfacial mechanical behavior of the AlN/Ag‒Cu composite structure
- Synchrotron X‐ray and neutron scattering studies of in situ heated BaO·2SiO 2 glasses
- Mass spectrometric study of the laser‐evaporated TaC–ZrC mixed carbide up to 4550 K
- Numerical 3D simulation of the porous microstructures of β‐TCP using accessible tools: A Young modulus approach
- Molten salts synthesized L‐Ta 2 O 5 :Er 3+ /Yb 3+ with superior pure green upconversion luminescence
- Boosting high‐temperature heat transfer of ceramic insulation tile with ordered‐conformation boron nitride
- Combining reinforcement learning with graph convolutional neural networks for efficient design of TiAl/TiAlN interfaces
- Decomposition and microstructural evolution of aluminum titanate
- Age dependency of neurometabolite T 1 relaxation times
- On the intrinsic sinterability of MgAl 2 O 4 nanopowders
- Role of metal elements in oxidation resistance of high‐entropy diborides
- Understanding the mechanism on Na + ‐mediated crystallization of α‐hemihydrate gypsum in Na 2 SO 4 –water solutions
- La 3+ –Al 3+ cosubstitution and enhanced luminescence in the green SrAl 2 Si 2 O 8 :Mn 2+ for liquid crystal display backlights
- Achieving high electrostrain performance in BNT‐based lead‐free piezoelectric ceramics modified by Sr(Sn 0.5 Ta 0.4 )O 3
- Ultrafast and robust T 2 mapping using optimized single‐shot multi‐echo planar imaging with alternating blips
- Effect of Sb doping on pyroelectric properties of KNN‐based ceramics
- Densification and mechanical properties of photopolymerized Si 3 N 4 ceramics via oxygen reduction and phosphate adhesion
- Ag‐doped hollow ZIFs‐derived Si@C composite based on waste silicon for lithium‐ion battery anodes
- Fabrication and properties of Bi‐doped Gd 3 Fe 5 O 12 infrared‐transparent ceramics with high magneto‐optical effect
- Enhanced electrocaloric effect in BaTiO 3 ‐based ceramics over a wide working temperature range by domain engineering
- Optimization of process parameters of ultrasonic‐assisted end face grinding of C f /SiC composites
- High‐strength high‐thermal‐conductivity Al 2 O 3 ceramics via colloidal processing and low‐temperature pressureless sintering
- Development of highly reactive partially calcined dolomite precursor: Synergistic effect CaO and MgO
- Achieving high piezoelectric performance and enhanced high‐temperature resistivity in CaBi 2 Nb 2 O 9 ‐based textured ceramics
- Relating the early‐age reaction kinetics and material property development in a model metakaolin geopolymer
- Impact of atmospheric conditions on the high‐temperature thermal conductivity of novel Cr‐free refractory materials
- Nanocrystalline yttria‐stabilized hafnia ceramics with low thermal conductivity and enhanced mechanical properties
- Melting and solidifying behavior of lunar regolith simulant under a vacuum environment
- Controllable synthesis of mesoporous Mo 2 C nanofibers photocatalyst for H 2 O 2 production
- Oxidation behavior and kinetics of Mg 0.27 Al 2.58 O 3.73 N 0.27 transparent ceramic at high temperatures
- Phonon evolution behavior under multi‐field conditions in re‐entrant relaxor NaNbO 3 decorated with Sb
- Investigation of the induction period of C 3 S hydration: A molecular dynamics simulation approach
- Improving the thermal conductivity and mechanical properties of Si 3 N 4 ceramic by regulating bimodal microstructure
- Tailoring structural and compositional influence on γ‐ray shielding efficiency of Zeolite frameworks
- Molten LiF additive promoted low‐temperature densification in sintering Li 2 TiO 3 ceramic pebbles
- Adjustable ferrite amount for various characteristics of Ni 0.5 Cd 0.5 Fe 2 O 4 nanoparticles incorporated in a SiO 2 matrix
- The synergetic modification on ionic conductivity and air stability of Ga 3+ and Ta 5+ co‐doped Li 7 La 3 Zr 2 O 12 (LLZO)
- The effects of silicon additive content on thermal conductivity and mechanical properties of Si 3 N 4 ceramics
- Open‐source implementation of X‐nuclear sequences using the Pulseq framework
- Aliovalent substitution of Pb with (Li 1/2 Bi 1/2 ) in PbZrO 3 model system
- Comparing the vibrational properties of common glass interatomic potentials
- Effects of Re 3+ radius on phase composition and thermal sensitivity of Ba 4.5 Re 9 Ti 18 O 54 ceramics
- Crystal spatial distribution controls the electrical response of nuclear waste glasses containing RuO 2 crystals
- Thermodynamic description of the Na 2 O─CaO─SiO 2 system and its application to solidification and heat treatment design
- Computational screening of structurally and thermodynamically stable high‐entropy oxides with a perovskite structure
- Enhanced high‐temperature indentation fracture toughness of zirconia ceramics via HfO 2 doping
- Modeling of industrial isothermal chemical vapor infiltration process for C/SiC structural composites
- Controllable fabrication and applications of one‐dimensional silicon carbide nanomaterials: A review
- Dual‐mode photoluminescence of Ba 2 GdF 7 : Yb 3+ , Er 3+ , Eu 3+ spheroidal nanoparticles for optical anticounterfeiting
- Effect of nitrogen doping concentration on 4H‐SiC laser slicing
- Local structure of iron and coloration mechanism of Mi‐se celadon glaze by Mössbauer spectroscopy and SR‐XAFS
- Probing the early stages of hydration in dicalcium silicates at electronic level
- Energy storage and ferroelectric properties of La‐doped Bi 3 TaTiO 9 thin films affected by La concentration
- Effect of groove‐like structures on residual stress and shear strength in C/SiC–C103 alloy joints
- A relationship between defect engineering and pyroelectric response mechanism of Mn‐doped KNN‐based ceramics
- Formation of SnO‐based glassy anode for all‐solid‐state battery prepared by laser‐based powder bed fusion technique
- Preparation of dense B 4 C ceramics via epoxy system gelcasting and different sintering methods
- RS Coded Mixed RF and Multi-hop FSO System for 5G-CRAN- A Performance Analysis
- A Comprehensive Survey on Mamba: Architectures, Challenges, and Opportunities
- CoLLM: Industrial Large-Small Model Collaboration with Fuzzy Decision-making Agent and Self-Reflection
- Parallel Silicon Single-Electron Pumps for Generating Nanoampere Current
- MSACC: A Unified Multimodal Sentiment Analysis Framework for High Interpretability and Zero-shot Performance
