Open AccessENGINEERING STUDY FOR A NEW SEAWATER INTAKE SYSTEM
Author(s) -
Billy L. Edge,
Roger S. Schlueter
Publication year - 1988
Publication title -
proceedings of conference on coastal engineering/proceedings of ... conference on coastal engineering
Language(s) - English
Resource type - Journals
eISSN - 2156-1028
pISSN - 0589-087X
DOI - 10.9753/icce.v21.201
Subject(s) - seawater , shore , settling , breakwater , environmental science , oceanography , sediment , structural basin , geology , hydrology (agriculture) , geotechnical engineering , environmental engineering , geomorphology
Environmental assessment, engineering studies and designs were completed for a new 26.5 m3/s seawater intake system in the Persian Gulf. The original intake facility consisted of a curved, 60m breakwater with one end attached to the shoreline, a settling basin immediately adjacent to the shoreline and dredged to a maximum depth of approximately 5m, and a pumphouse structure located on shore such that the seaward wall formed one side of the settling basin. The facility located on an island in the Gulf, which served multiple seawater uses, had experienced both structural and operational problems, the latter consisting principally of excessive ingestion of sediment and seaweed. These factors plus the requirement for additional demands for seawater beyond plant capacity caused the owner to initiate a study of alternative intake systems, produce a design for the most effective solution and construct the new intake system.