Open AccessCharacteristics of AlGaN/GaN high electron mobility transistor temperature sensor
Author(s) -
Xu-Yang Liu,
Heqiu Zhang,
Li Bingbing,
Jun Liu,
Dongyang Xue,
Wang Hengshan,
Liang Hongwei,
Xiaochuan Xia
Publication year - 2020
Publication title -
wuli xuebao
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.199
H-Index - 47
ISSN - 1000-3290
DOI - 10.7498/aps.69.20190640
Subject(s) - materials science , optoelectronics , sensitivity (control systems) , transistor , heterojunction , electron mobility , semiconductor , band gap , voltage , electrical engineering , electronic engineering , engineering
Semiconductor temperature sensors have been widely used in medical, industrial, aviation and civil fields due to their advantages such as high sensitivity, small size, low power consumption and strong anti-interference ability. However, most Si-based temperature sensors are not suitable for the application in high-temperature environments. The new AlGaN/GaN heterojunction material not only has a wide band gap, but also has a high two-dimensional electron gas concentration and carrier mobility. Therefore, the device made with it not only has good electrical properties, but also can be applied in ultra-high environments. In this paper, a temperature sensor based on gateless AlGaN/GaN high electron mobility transistor structure was fabricated and its temperature-dependent electrical properties were characterized. The temperature dependence of current-voltage characteristics of the device were tested from 50 to 400 °C. The sensitivity of the device was studied as a function of the channel aspect ratio of the device. The stability of electrical properties was characterized after heating in air and nitrogen at 300—500 °C for 1 hour. The theoretical and experimental results show that as the aspect ratio of the device increases, the sensitivity of the device increases. At a fixed current of 0.01 A, the average sensitivity of the device voltage with temperature changes is 44.5 mV/°C. Meanwhile, the good high temperature retention stability is shown during stability experiments.