Open AccessHigh temperature oxidation resistance of cluster model designed alloys Cu-Cu12-[Mx/(12+x)Ni12/(12+x)]5 (M=Si, Cr, Cr+Fe)
Author(s) -
Xiaona Li,
Zheng Yue-Hong,
Zhen Li,
Miao Wang,
Kun Zhang,
Dong Chen
Publication year - 2014
Publication title -
wuli xuebao
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.199
H-Index - 47
ISSN - 1000-3290
DOI - 10.7498/aps.63.028102
Subject(s) - materials science , alloy , oxide , precipitation , cluster (spacecraft) , solid solution , silicon , reactivity (psychology) , chromium , metallurgy , physics , computer science , programming language , medicine , alternative medicine , pathology , meteorology
Based on the stable solid solution cluster model, cupronickel is microalloylized in this paper. Alloys with different Ni-M (M=Si, Cr, Cr+Fe) ratios are designed at constant atomic ration of Cu (72.22 at.%). The high temperature oxidation resistance and mechanism of alloy are also investigated. In the Cu-Ni-Si system, the addition of Ni-Si can enhance the oxidation resistance of the alloy from two aspects: firstly, the Ni-Si is in solid solution state when being added as a cluster, it can inhibit the chemical reactivity of Cu-Ni-Si alloy; secondly, anti-oxidation precipitation can be obtained with the increase of Si/Ni ratio. Therefore, the oxidation resistance of the alloy is not because of the formation of the compact silicon oxide film. In the Cu-Ni-Cr system, the oxidation is obviously inhibited at medium temperatures (lower than 800 ℃). But at higher temperatures, the oxidation resistance is relevant to the integrality of chrome oxide layer. The high temperature oxidation resistance is closely related to Cr/Ni ratio, hence an appropriate Cr/Ni ratio is necessary for the good high temperature oxidation resistance. Compared with the third element Cr, the forth element Fe cannot be oxidized first. Therefore, combined addition of Cr and Fe can only inhibit the medium temperature oxidation, but not high temperature oxidation.