Open AccessBikomponent ve Karışım HDPE/LDPE Filamentlerin Üretimi ve 3B Yazıcılarda Kullanımı
Author(s) -
Oğuzhan Uslu,
Yakup Aykut
Publication year - 2021
Publication title -
tekstil ve mühendis
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.153
H-Index - 6
eISSN - 2147-0510
pISSN - 1300-7599
DOI - 10.7216/1300759920212812101
Subject(s) - high density polyethylene , materials science , low density polyethylene , composite material , polyethylene , fiber , thermoplastic , honeycomb
Thermoplastic polymer have been used in 3D printing technologies since the objects produced via 3D methods by using thermoplastic materials can be recycled and reformed easly. In order to use a thermoplastic material in the 3D technologies, the thermplastic polymers are spun into fiber structures and then 3D objects are produced from these fibers. In this regard, low density polyethylene (LDPE) and high density polyethylene (HDPE) were melt spun into fiber with various construction including neat, blend and bicomponent forms. Chemical, microstructural, thermal and mechanical properties of the produced fibers were investigated. 3D printable properties of the prepared fibers were observed by using them in the 3D printer. It was observed that bicomponent LDPE/HDPE fibers were the most suitable fiber to produced 3D sample in the lab scale 3D printer. 3D honeycomb structure was produced from this fiber and its compression strength property was investigated by comparing the same size of the PLA honeycomb structure. Compression strength test result of the honeycomb sample produced from LDPE/HDPE bicomponent fiber was close to compression strength test result of the PLA honeycomb sample. The results revelaled that LDPE/HDPE bicomponent fibers could be an alternative to PLA fiber in 3D printing technologies.