Open AccessPLASMA PARAMETERS, DENSITIES OF ACTIVE SPECIES AND ETCHING KINETICS IN C4F8+Ar GAS MIXTURE
Author(s) -
Alexander Efremov,
D. B. Murin,
KwangHo Kwon
Publication year - 2019
Publication title -
izvestiâ vysših učebnyh zavedenij. himiâ i himičeskaâ tehnologiâ/izvestiâ vysših učebnyh zavedenij. seriâ himiâ i himičeskaâ tehnologiâ
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.221
H-Index - 5
eISSN - 2500-3070
pISSN - 0579-2991
DOI - 10.6060/ivkkt.20196202.5791
Subject(s) - fluorocarbon , langmuir probe , etching (microfabrication) , fluorine , chemistry , plasma , plasma modeling , ion , analytical chemistry (journal) , plasma parameters , reactive ion etching , plasma etching , plasma diagnostics , layer (electronics) , organic chemistry , physics , quantum mechanics
In this work, we performed the combined (experimental and model-based) study of gas-phase plasma characteristics and etching kinetics for both Si and SiO2 in the C4F8 + Ar gas mixture. The experiments were carried out at constant total gas pressure (p = 6 mTorr), input power (W = 900 W) and bias power (Wdc = 200 W) while the C4F8/Ar mixing ratio was varied in the range of 0–75% Ar. The data on internal plasma parameters, plasma chemistry as well as the steady-state plasma composition were obtained by both Langmuir probe diagnostics and 0-dimensional plasma modeling. The etching mechanisms were investigated through the analysis of relationships between the measured etching rates and the model-predicted fluxes of active species (F atoms, polymerizing CFx radicals and positive ions). It was found that, under the given set of experimental conditions, the Si and SiO2 etching process 1) appears in the steady-state etching regime; 2) exhibits the features of the ion-assisted chemical reactions in the neutral-flux-limited mode; and 3) is influenced by the fluorocarbon polymer film thickness. It was shown that the influence of input process parameters on the effective probability of chemical reaction between Si, SiO2 and fluorine atoms may be adequately characterized by the fluorocarbon radicals/fluorine atoms and fluorocarbon radicals/ion energy flux ratios.