Open AccessHigh-speed (subsecond) measurement of heat capacity, electrical resistivity, and thermal radiation properties of tungsten in the range 2000 to 3600 K
Author(s) -
A. Cezairliyan,
J. L. McClure
Publication year - 1971
Publication title -
journal of research of the national bureau of standards. section a. physics and chemistry
Language(s) - English
Resource type - Journals
eISSN - 2376-5704
pISSN - 0022-4332
DOI - 10.6028/jres.075a.027
Subject(s) - tungsten , electrical resistivity and conductivity , materials science , thermal , radiation , range (aeronautics) , thermal radiation , atmospheric temperature range , heat capacity , high heat , composite material , optics , thermodynamics , metallurgy , physics , electrical engineering , engineering
Measurements of heat capacity, electrical resistivity, hemispherical total emittance, and normal spectral emittance of tungsten above 2000 K by a pulse heating technique are described. Duration of an individual experiment, in which the specimen is heated from room temperature to near its melting point, is less than one second. Temperature measurements are made with a photoelectric pyrometer. Experimental quantities are recorded with a digital data acquisition system, which has a full-scale signal resolution of one part in 8000. Time resolution of the entire system is 0.4 ms. Results on the above properties of tungsten in the range 2000 to 3600 K are reported and are compared with those in the literature. Estimated inaccuracy of measured properties in the above temperature range is: 2 to 3 percent for heat capacity, 1 percent for electrical resistivity, 3 percent for hemispherical total and normal spectral emittances.