Open AccessRock Fragmentation Evaluation towards Blast-To-Mill Concept of Blast Optimization in Hard Rock Mines
Author(s) -
Bright Oppong Afum
Publication year - 2021
Language(s) - English
DOI - 10.54026/jmms/1030
Subject(s) - crusher , rock blasting , mining engineering , comminution , mill , rock mass classification , fragmentation (computing) , beneficiation , copper mine , geology , engineering , geotechnical engineering , computer science , metallurgy , mechanical engineering , materials science , copper , operating system
Traditional blast optimisation studies ensure efficient mining operation but ignore potential impact of blasting on primary crushing. The performance of the primary crusher is key to the ore beneficiation process. Optimisation studies conducted through the mining operations to the comminution circuit is vital to the mine-to-mill concepts in the mining industry. In this approach, an innovative approach to the assessment of in-situ blasting is proposed and evaluated. This approach focuses on the acceptability of rock fragments on the Run-of-Mine (ROM) pad as opposed to the pits. Fragmentation analysis was conducted in the pit and on the ROM pad. A correlation efficiency of 0.92 was realized between the measured rock fragments in the pit and that on the ROM pad. About 10% of the rock fragments in the pit were classified as boulders while about 30% of the same rock fragments deposited on the ROM pad were classified as boulders. However, about 30% of the rockpile on the ROM pad was estimated to be lower than the Close Side Setting (CSS) of the primary crusher. It is recommended that future research evaluates the energy consumption and its related cost at the primary crusher in comparison to in-pit fragmentation and mucking cost performance.