Open AccessANATOMY AND DRYING OF WOOD OF FOUR SPECIES FROM AN AGROFORESTRY SYSTEM
Author(s) -
Élder Eloy,
Rômulo Trevisan,
Tainara dos Santos Piecha,
Mágda Rosa Fontoura,
Henrique Webber Dalla Costa,
Braulio Otomar Caron
Publication year - 2021
Publication title -
floresta
Language(s) - English
Resource type - Journals
eISSN - 1982-4688
pISSN - 0015-3826
DOI - 10.5380/rf.v51i4.74061
Subject(s) - eucalyptus , fiber , water content , horticulture , biology , mathematics , botany , materials science , composite material , geology , geotechnical engineering
Drying is an important process in the generation of wood products, as it increases the quality of the final products; however, it is influenced by various anatomical characteristics. The aim of this study was to evaluate the influence of anatomy on the drying of wood of Parapiptadenia rigida (Benth.) Brenan, Peltophorum dubium (Spreng.) Taub., Eucalyptus grandis W. Hill × Eucalyptus urophylla S.T. Blake (hybrid), and Schizolobium parahyba (Vell.) Blake trees from an agroforestry system. Three trees aged 9 years were sampled for each species. The trees were removed from the study region when their diameter at breast height (DBH) was 1.30 m from the ground. Blocks were made with dimensions of 5.0 × 5.0 × 15.0 cm for the evaluation of oven drying and 1.5 × 1.5 × 2.0 cm for anatomical features. S. parahyba has the highest value of fiber diameter (35.1 µm) and lumen diameter (27.6 µm), whereas P. dubium had the highest value of cell wall thickness (6.8 µm). The average equilibrium moisture content was 10.98% after 40 days of drying. The anatomy of the wood influenced the drying of the four species intensity, which was related to humidity during all periods. The anatomical parameters that most influenced drying were fiber diameter (Pearson correlation coefficient: 0.77), lumen diameter (0.76), and fiber cell wall thickness (0.73); the higher the values, the greater was the drying intensity.