Open AccessUtilization of Giad Steel Slag as Partial Replacement for Coarse Aggregates in Concrete
Author(s) -
Osama M. A. Daoud,
İbrahim Mutlu
Publication year - 2021
Language(s) - English
Resource type - Journals
ISSN - 1858-7313
DOI - 10.52981/fjes.v9i2.677
Subject(s) - slump , compressive strength , aggregate (composite) , electric arc furnace , flexural strength , ultimate tensile strength , materials science , slag (welding) , properties of concrete , metallurgy , concrete slump test , composite material
This research paper focuses on the possibility of utilization of Giad electric arc furnace slag (GEAFS) as a partial replacement for coarse aggregates in concrete, without compromising on its workability and strength. The electric arc furnace slag is a waste product from the steel manufacturing which may be used as partial replacement of coarse aggregates in concrete. This paper presents an experimental study on fresh and hardened properties of concrete containing steel slag aggregates. Slump, as well as strength properties of concrete prepared with natural coarse aggregate, partially replaced by the GEAFS in different proportions varying from 25 %, 50 % and 75 %. The GEAFS concrete shows marginal decrease in slump for the further replacement. Compressive, split and Flexural strength of the GEAFS concrete have been increased for the GEAFS addition. Highest compressive, tensile and flexural strength have been achieved by the mix containing 50 % GEAFS coarse aggregates. Using of steel slag will result in decrease of waste landfilling, and improving environmental condition.