Open AccessPrediction of tensile strength of fused deposition modeling (FDM) printed PLA using classic laminate theory
Author(s) -
Shilpesh R. Rajpurohit,
Harshit K. Dave,
K. P. Rajurkar
Publication year - 2022
Publication title -
engineering solid mechanics
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.528
H-Index - 17
eISSN - 2291-8752
pISSN - 2291-8744
DOI - 10.5267/j.esm.2021.12.002
Subject(s) - ultimate tensile strength , raster graphics , materials science , fused deposition modeling , composite material , polylactic acid , 3d printing , computer science , polymer , artificial intelligence
The application of Fused Deposition Modeling (FDM) is restricted due to limited information about the mechanical properties of printed parts. Therefore, it is required to determine the mechanical properties of the FDM properties to avail the full benefit of the FDM process. In the present study, Classic Laminate Theory (CLT) has been employed at the different configurations of layer thickness and raster width. The required elastic constant of material for CLT has been experimentally obtained through FDM printed Polylactic Acid (PLA) unidirectional specimens at 0°, 45° and 90° for different combinations of layer height and raster width. For these different combinations of layer height and raster width, constitutive models were developed to predict the tensile properties of the PLA parts. Tensile strength of the FDM printed bi-directional specimens has been experimentally obtained to validate the proposed CLT model results. The experimental tensile strength data is in good agreement with the data predicted by the proposed CLT model. Higher tensile strength and modulus were achieved with 0° raster angle compared to 90° raster angle. In the case of a bi-directional printed specimen, higher tensile strength was obtained with 45°/-45° raster angle followed by 30°/-60° and 0°/90° raster angle.