
RESEARCH OF DRYING PROPERTIES OF CERAMIC MASS IN THE SYSTEM «LOESSLIKE LOAM - ASH OF EKIBASTUZ HPP”
Author(s) -
Sarsenbek Montayev,
A. B. SHINGUZHIYEVA,
Karzhaubai Zh Dosov,
B.T. Shakeshev,
N. S. MONTAYEVA
Publication year - 2020
Publication title -
vestnik nacionalʹnoj inženernoj akademii respubliki kazahstan
Language(s) - English
Resource type - Journals
eISSN - 2709-4707
pISSN - 2709-4693
DOI - 10.47533/2020.1606-146x.19
Subject(s) - loam , materials science , raw material , ceramic , moisture , molding (decorative) , water content , composite material , ductility (earth science) , environmental science , geotechnical engineering , soil water , chemistry , soil science , geology , creep , organic chemistry
The article investigates the drying properties of ceramic mass in the system “loesslike loam - ash of Ekibastuz HPP”. Ceramdor obtained from pure loam was selected as a control sample. A change in the structural and mechanical characteristics of ceramic masses during the drying process is associated with a change in temperature and moisture content of the material. The following results were obtained: molding moisture indicators, ductility numbers decrease with increasing ash. According to the classification of clay raw materials by plasticity, loam from a moderately plastic state goes into the category of low-plastic raw materials. With an increase in ash content of up to 20%, the sensitivity coefficient to drying leads to an increase in the time of crack appearance on the samples. A slight decrease in strength indicators is observed from 5.4 to 4.5 MPa. Thus, the results serve as the basis for the development of technological parameters in order to obtain ceramdor.