Open AccessNumerical and Experimental Study on the Grinding Performance of Ti-Based Super-Alloy
Author(s) -
Hung Trong Phi,
Got Van Hoang,
Trung Kiên Nguyen,
Son Hoanh Truong
Publication year - 2021
Publication title -
international journal of engineering and technology innovation
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.184
H-Index - 8
eISSN - 2226-809X
pISSN - 2223-5329
DOI - 10.46604/ijeti.2021.7199
Subject(s) - grinding , materials science , boron nitride , specific energy , metallurgy , alloy , composite material , mechanical engineering , engineering , quantum mechanics , physics
The experiments of the surface grinding of Ti-6Al-4V grade 5 alloy (Ti-64) with a resin-bonded cubic Boron Nitride (cBN) grinding wheel are performed in this research to estimate the influence of cutting parameters named workpiece infeed speed, Depth of Cut (DOC), cooling condition on the grinding force, force ratio, and specific energy. A finite element simulation model of single-grain grinding of Ti-64 is also implemented in order to predict the values of grinding forces and temperature. The experimental results show that an increase of workpiece infeed speed creates higher intensified cutting forces than the DOC. The grinding experiments under wet conditions present slightly lower tangential forces, force ratio, and specific energy than those in dry grinding. The simulation outcomes exhibit that the relative deviation of simulated and experimental forces is in the range of 1-15%. The increase in feed rate considerably reduces grinding temperature, while enhancement of DOC elevates the heat generation in the cutting zone.