Open AccessCold Start Strategy of the CubeSat GPS Receiver
Author(s) -
Pavel Kovář,
S. Jelen
Publication year - 2014
Publication title -
advances in electrical and computer engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.254
H-Index - 23
eISSN - 1844-7600
pISSN - 1582-7445
DOI - 10.4316/aece.2014.02005
Subject(s) - cubesat , global positioning system , gps receiver , precision lightweight gps receiver , computer science , assisted gps , aeronautics , remote sensing , real time computing , telecommunications , aerospace engineering , engineering , geology , satellite
The cold start of the LEO satellite GPS receiver is complicated due to a large Doppler frequency shift, Doppler frequency rate of the navigation signals and a rapid change of the satellite visibility. The cold start time can be shortened by a proper strategy of a selection of the satellites to be searched for. The cold start simulator was developed and used for optimization of the sequence of the satellites search, for development and testing of an advanced satellite selection algorithm that utilizes information on the satellites already detected and for optimization of a frequency search range. The best performance was achieved by using an advanced selection strategy. The strategy is based on the selection of the satellites nearest to the detected satellite, using the average angle between the Earth center (apex) and the satellites. Furthermore, the simulation shows that it is not practical to investigate all frequencies within the range of the maximum possible Doppler frequency shift of the carrier wave of the navigation signal, but investigate approximately +/- 35 kHz range and, if not successful, switch to the next satellite. The simulations proved that a simple GPS receiver with the sequential search algorithms can operate in the LEO orbit