Comparative study of sucrose plasticised bioplastic derivatives with selected petro-plastics

The major setback with most bioplastics is their inherent inability to compete with Petro-plastics in terms of high production cost, and there poor mechanical properties like low tensile strength and percentage extension. This study explore the availability and affordability of mango starch as raw material for bioplastic production and compared some of its mechanical properties with High density Polyethylene (HDPE), Low density polyethylene (LDPE), polyvinyl chloride (PVC), and Polyurethane (PU). Mango starch was used to synthesize bioplastic derivatives, with variable levels of sucrose as plasticiser, aqueous HCl concentration and Carboxymethyl cellulose (CMC) as additive and the mechanical properties of the derived biofilms was measured and compared with the selected Petro-plastics films. It was observed that B1 thermoplastic derivatives have the higher young modulus of 5.658 GPa than that obtained for PVC (4.682 GPa), and PU (3.771 GPa) but show no significant difference and significantly higher than that of HDPE (0.049 GPa), and LDPE (0.063 GPa) (p < 0.05). B2 and B3 indicated a young modulus that is significantly lower than PU and PVC, but showed a young modulus that is higher than LDPE and HDPE with no significant difference (p < 0.05). The FTIR spectra indicate that hydrogen bond was formed in the bulk matrix of the bioplastic derivatives at a band region of 3600 -600 cm-1 wavenumber with broad discrete peaks. Keywords: Petro-plastics; Bioplastics; Mechanical Properties; Plasticization; Mango Starch