Open AccessShort-Term Creep-Rupture Behaviour of AISI 310S Austenitic Stainless Steel Sheets Manufactured in Salem Steel Plant, a Special Steels Unit of Steel Authority of India Limited, Ministry of Steel, Government of India
Author(s) -
Amrit Raj,
AUTHOR_ID
Publication year - 2021
Publication title -
ymer
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.103
H-Index - 5
ISSN - 0044-0477
DOI - 10.37896/ymer20.12/33
Subject(s) - creep , materials science , metallurgy , grain boundary , intergranular corrosion , austenitic stainless steel , austenite , composite material , corrosion , microstructure
The creep behavior of AISI 310S stainless steel taken from SAIL’s Salem stainless steel plant has been investigated by constant load tensile creep test at the temperatures of 973, 1023, and 1073 K and loads of 66.6, 74.8, 86.6, and 94.8 MPa. It exhibits steadystate creep behavior in most test conditions. The double logarithm plot of rupture life and applied stress yielded straight lines at all the three test temperatures indicating that power-law creep due to dislocation climb is the operating mechanism of creep deformation. Linear relationship was obtained for plots of logarithm of rupture life against inverse temperature obeying Arrhenius type of temperature dependence with activation energy of 340 kJ/mol. The stress-rupture data yielded a master curve of Larson-Miller parameter. The plot of Monkman-Grant relationship is typical indicating that rupture is controlled by growth of grain boundary cavities. The metallographic examination of crept samples revealed formation of grain boundary voids and cracks leading to intergranular creep fracture. Deformation twins and carbide precipitates were also observed. Creep-rupture properties are compared with that of AISI 600 ironbased superalloy to analyze quantitatively its behavior