Open AccessFlexural Behavior of Damaged Lightweight Reinforced Concrete Beams Strengthened by CFRP
Author(s) -
Ali I. Salahaldin,
Muyasser M. Jomaa’h,
Dlovan M. Naser
Publication year - 2021
Publication title -
maǧallaẗ al-abḥāṯ al-handasiyyaẗ
Language(s) - English
Resource type - Journals
eISSN - 2307-1885
pISSN - 2307-1877
DOI - 10.36909/jer.v9iicrie.11647
Subject(s) - beam (structure) , flexural strength , materials science , aggregate (composite) , structural engineering , composite material , three point flexural test , engineering
One of the most common methods of strengthening, rehabilitation, or repairing of structural lightweight concrete (LWC) elements is the external carbon fiber reinforced polymer (CFRP) strips. This paper presents an experimental study on the flexural behavior of reinforced concrete beams which comprise lightweight aggregate concrete, in different proportions, strengthened by CFRP sheets. The experimental program included six specimens with a 1500mm effective span. Two of the specimens were normal concrete beams. Another two samples were lightweight beams with a 50% aggregate replacement with pumice. The last two specimens were lightweight concrete beams with a 75% aggregate replacement with pumice. These beams were casted and tested twice under a two-point load application, once before strengthening and the other after that. The experimental results show that full strengthening of the beams along with their entire length, increase in load-carrying capacity by 75%, 113%, and 107% for normal concrete beam, (50% aggregate replacement) LWC beam, and (75% aggregate replacement) LWC beam respectively. While the middle-third strengthening of the beams shows an increase in load-carrying capacity by 64%, 72%, and 57% for normal concrete beam, (50% aggregate replacement) LWC aggregate beam, and (75% aggregate replacement) LWC beam respectively. The strength of the two types of LWC beams was almost the same and it is about 85% of the concrete beam with normal weight.