Open AccessDry Sliding Friction of Al Si B 4 C Composites Prepared Through Powder Metallurgy using Taguchi Design
Author(s) -
Abraham Subaraj. M,
Bensam Raj. J,
P. Naveenchandran,
Christopher Ezhil Singh. S,
*Glan Devadhas.G
Publication year - 2020
Publication title -
international journal of innovative technology and exploring engineering
Language(s) - English
Resource type - Journals
ISSN - 2278-3075
DOI - 10.35940/ijitee.f3462.1091220
Subject(s) - taguchi methods , lubricant , materials science , powder metallurgy , composite material , compaction , orthogonal array , molybdenum disulfide , die (integrated circuit) , friction coefficient , metallurgy , sintering , nanotechnology
This research paper discuss about the friction behavior of Al-12Si-xB4C composites prepared through powder metallurgy method by varying the weight percentage of reinforcement (x = 2, 4, 6, 8, and 10) content. The samples were prepared by using die and punch assembly and the lubricant used to eject the sample from the die was molybdenum disulfide. The compaction was done by using compression testing machine by applying a pressure of 800MPa. The dry sliding friction behavior of the sample was conducted on Pin-on-Disc machine and the experimental values of friction were calibrated. Taguchi design experiment was done by applying L25 orthogonal array for 3 factors at 5 levels for the response parameter coefficient of friction. Analysis of Variance demonstrated by Mean and S/N ratio table for coefficient of friction was discussed and from the table it can be seen that the reinforcement plays a main role, when the compared with load and sliding distance. The normal probability plot shows that the residuals falls near to the red line, it indicate that the error values were less in the model.