Open AccessPerformance of a Triple Cantilever Hybrid Energy Harvester (TCHEH) Based on the Triboelectric Surface Modification
Author(s) -
Muhammad Azwan,
Hanim Salleh,
S. Jagan Mohan Rao
Publication year - 2019
Publication title -
international journal of engineering and advanced technology
Language(s) - English
Resource type - Journals
ISSN - 2249-8958
DOI - 10.35940/ijeat.a2662.109119
Subject(s) - triboelectric effect , cantilever , energy harvesting , materials science , mechanical energy , power (physics) , power density , electrical engineering , voltage , proof mass , acoustics , polytetrafluoroethylene , surface modification , composite material , optoelectronics , mechanical engineering , engineering , physics , microelectromechanical systems , quantum mechanics
The aim of this study is to characterise the performance of a Triple Cantilever Hybrid Energy Harvester (TCHEH) based on the triboelectric surface modification. The application is to harvest sufficient amount of power for low power sensor node. The whole system comprises of three separated generators being put together into one prototype with the design of triple cantilever beam. The triple cantilever consists of top and bottom triboelectric energy harvester (TEH) and middle section piezoelectric energy harvester (PEH). The top and bottom section is the Polytetrafluoroethylene (PTFE). The testing for TEH consists of pairing the highest negative charged material which is Polytetrafluoroethylene (PTFE) with few other positively charged materials. The best pair was used for further testing by modifying the triboelectricsurface in order to increase the power output. At the frequency of 13Hz and acceleration at 0.27gms-2, the ideal opened-circuit voltage, VOC produced for top TEHwas 2.23V and for the bottom TEHwas 2.24V, while for the PEHwas 9.27V. The final prototype of TCHEHproduced an optimum power of 7.29mW at a resistance of 9kΩ. The power density obtained from the prototype was7.36Wm-2 which enable the low power sensor node to power up.