Open AccessStudy on the effect of ZrO2 and SiO2 additions type on the properties of high alumina crucibles for melting heat-resistant alloys and steels
Author(s) -
В. В. Примаченко,
I. G. Shulyk,
K. I. Kushchenko,
P. O. Kushchenko,
Yu. O. Krakhmal,
Л. П. Ткаченко,
Yu. Ye. Mishnyova
Publication year - 2021
Publication title -
naukovì doslìdžennâ z vognetrivìv ta tehnìčnoï keramìki. zbìrnik naukovih pracʹ
Language(s) - English
Resource type - Journals
ISSN - 2663-3566
DOI - 10.35857/2663-3566.121.05
Subject(s) - cubic zirconia , thermal shock , zircon , materials science , porosity , mullite , metallurgy , composite material , mineralogy , chemistry , geology , ceramic , paleontology
The technology of vibrocasting high-quality refractories from granular masses of different chemical composition, size, configuration and weight of products, in particular crucibles for induction melting of heat-resistant alloys was developed and introduced by JSC “URIR named after A. S. Berezhnoy”. According to the developed technology, mullite-alumina zircon-containing crucibles contain ZrO2 ~ 8 %, zirconia-containing crucibles — ~ 17 %, alumina zircon-containing crucibles — ~ 8 %, ~ 8—10 % and ~ 25 %, have open porosity 20 thermal cycles (1300 °C — water).
The article studies the effect of ZrO2 and SiO2 additives type introduced with zircon or zirconia in combination with a silica-containing additive on the main properties of vibrocasting samples after firing at 1580 °C.
As a result of the studies the high alumina samples with 10 % ZrO2, introduced by zircon or zirconia powder, were produced, which are characterized by apparent density of 3.12 and 3.08 g/cm3, open porosity of 14.4 and 15.5 %, cold crushing strength 145 and 210 N/mm2, thermal shock resistance > 20 thermal cycles and 6 thermal cycles (1300 °C — water) respectively. That is, with practically the same chemical composition, samples with zircon have better indicators of apparent density and especially thermal shock resistance than samples with zirconia in combination with silica. The high thermal shock resistance of samples with zircon can be explained by a nature of the pores which long irregular in configuration and connected to each and, as well as microfractured structure due to the decomposition of zircon and the formation of microcrystalline monoclinic zirconia while in the structure of the samples, which included zirconia powder and silica and a mixture of joint grinding of alumina and a silica-containing additive, the pores are predominantly round isolated. Considering also that zircon is a domestic material and is cheaper than imported ZrO2, it is more expedient to use zircon for crucibles.