Open AccessSolid State Reaction Synthesis and Characterization of Aluminum Doped Titanium Dioxide Nanomaterials
Author(s) -
Muna M. Abbas,
Mohammed Rasheed
Publication year - 2020
Publication title -
xi'nan jiaotong daxue xuebao
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.308
H-Index - 21
ISSN - 0258-2724
DOI - 10.35741/issn.0258-2724.55.2.63
Subject(s) - titanium dioxide , materials science , crystallinity , fourier transform infrared spectroscopy , surface roughness , nanoparticle , pellets , chemical engineering , titanium , aluminium , scanning electron microscope , nanomaterials , annealing (glass) , ceramic , analytical chemistry (journal) , composite material , metallurgy , nanotechnology , chemistry , organic chemistry , engineering
In this paper, aluminum doped titanium dioxide nanopowder with doping concentration of different weights were successfully prepared with a simple technique: the classic ceramic technique (or solid-state method). This technique permits the acquiring of powders as pellets with a small amount of the material. The best conditions for the prepared pellets are obtained. Titanium dioxide nanoparticles are mixed with different amounts of aluminum concentrations (0%, 3%, 5%, and 7%). The powders were then mixed and consolidated into pellets and sintered using a conventional furnace at 1100oC. The mechanical, thermal, structural, morphological (including roughness of the samples’ surfaces), and optical properties for those as-prepared samples are demonstrated by: Shore D hardness instrument, roughness test Instrument, Lee's Disc, X-ray diffraction, optical microscope, scanning electronic microscope, energy-dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy, respectively. The effect of aluminum doped concentrations on the characteristics of titanium dioxide nanoparticles depending on the above instruments are studied. The X-ray diffraction patterns appear to the crystallinity of these materials with a grain size between 20 nm and 30 nm. A roughness measurement indicates that the value of titanium dioxide nanoparticles decreases with the addition of aluminum weights according to the results of the hardness of the samples. Moreover, the results showed that the thermal conductivity increased with the increasing weight fraction of aluminum material. The main goal of the present paper is to investigate the annealing temperature-dependent behavior of the broadening parameter and the characteristics of aluminum doped titanium dioxide nanoparticles.