Open AccessSand-sodium-silicate mixtures grains composition optimization for structuring by steam-microwave solidification method
Author(s) -
Solonenko Lyudmila,
Repyakh Sergei,
Uzlov Kostiantyn
Publication year - 2021
Publication title -
teoriâ i praktika metallurgii
Language(s) - English
Resource type - Journals
ISSN - 1028-2335
DOI - 10.34185/tpm.1.2021.05
Subject(s) - sodium silicate , silicate , materials science , mineralogy , quartz , sodium , chemical engineering , composite material , chemistry , metallurgy , engineering
. Mixture sizes of sand-sodium-silicate conglomerates and sodium silicate solute content in them influences on the basic physical and technological indicators of molding and core mixtures structured in steam-microwave environment have been investigated. Sand-sodium-silicate mixture structured by steam-microwave environment (steam-microwave solidification method – SMS-process) composition has been optimized.Standard and generally accepted methods and techniques of molding mixtures investigation have beenused in this study. For mixtures manufacturing have been used: quartz sand brand 1K2O202; sodium silicate solute with silicate modulus of 2.8…3.0 and specific gravity of 1.42…1.44 g/cm3. Quartz sand cladding has been implemented with 0.5 and 2.5% sodium silicate solute (by weight, over 100% sand). Sand-sodium-silicate conglomerates have been scattered in sieves and conglomerates with sizes less than 0.315mm and with sizes from 0.315 to 0.63mm have been used for research. Mixture composition has been optimized according to results of simplex planning and experimental data by simplex triangles constructing and superimposing their formatted images on each other with darkened fields between isolines that do not meet of each parameters required level. To plot simplex lattices, model with simplex lattice plan of incomplete cube in Scheffe’s triple system has been used.For the first time, influence of mixture sand-sodium-silicate conglomerates sizes and sodium-silicate-solute content in them on basic indicators of mold and rod mixtures structured in steam-microwave environment has been established, and their composition has been optimized.Data obtained will be useful in molds and rods structured by SMS-process manufacturing. They will have predictable indicators of properties that correspond to their allowable level.Optimal composition of sand-sodium-silicate mixture, structured by SMS-process, is mixture of quartz sand, part of which passed through sieve with cell of 0.315 mm and have sodium silicate solute content (МSiO2=2.8…3.0, 2=1.42…1.44 g/сm3) in amount of 1.5% (by weight, over 100% quartz sand).Keywords.Sand, silicon silicate solute, steam-microwave solidification, optimization, conglomerates, strength, gas permeability, crushability, density, beam deflection, knockout energy.