Open AccessIBER CONCRETE FOR 3D-PRINTING
Author(s) -
Елена Шорстова,
Елена Шорстова,
Сергей Клюев,
Sergey Klyuev,
Александр Клюев,
A.V. Klyuev
Publication year - 2019
Publication title -
vestnik bgtu im. v.g. šuhova
Language(s) - English
Resource type - Journals
ISSN - 2071-7318
DOI - 10.34031/article_5ca1f6300a4956.62644399
Subject(s) - plasticizer , materials science , gypsum , aggregate (composite) , 3d printing , basalt , fiber , basalt fiber , composite material , work (physics) , geology , mechanical engineering , engineering , geochemistry
The article deals with the possibility of using 3D-printing in the construction industry. The analysis of the work performed in this area in the world. It also presents the main advantages of this method of construction of structures and buildings in general. Experimental studies were carried out using the components of the mixture: CEM I 42.5H Sebryakovcement, fine ground quartzitic sandstone with a specific surface of 700 m2/ kg using gypsum. Sand was used as fine aggregate. To make the mixture plasticity, such additives as plasticizer PFM-NLK and Murapor Kombi 756 were used. Basalt fiber was used as a reinforcing agent. Were developed compositions of the concrete mixture dispersed reinforced with basalt fiber. The work was able to develop the composition of fiber-reinforced concrete mixture, which can be used for 3D- printing. Its strength characteristics were determined, allowing to conclude that this composition meets all the requirements for this technology.