A Novel approach for formulating CO2 Foam Based Fracturing Fluid by Synthesized Grafting Copolymerization to Enhance its Stability for HPHT Shale Reservoirs

Conventional Sources of energy are depleting at an alarming rate which give us unconventional resources as an onlyoption for energy source. Unconventional sources of energy like Shale gas, tight gas, Coal bed methane are difficult toexploit as compared to the conventional sources of energy. Hydraulic Fracturing is the well stimulation technique used forexploitation and production of these unconventional resources. Foam fracturing is the most opted stimulation techniquefor low permeability shallow wells because of its reduced damage potential to reactive and sensitive formations. Thisresearch paper discusses about the evaluation of attempt made to develop an eco-friendly CO2 foam based fracturingfluid which can be used at HPHT conditions for shale reservoirs by Grafting Copolymerization. The graft copolymerwas developed by free radical polymerization of Gum Acacia (GA) and Lactic acid (LA) by using Potassium Persulphate(KPS) as an initiator and its characterization was done by FESEM and FTIR analysis. Then, the grafted copolymer(GA-g-LA) was processed with CO2 foam based fracturing fluid as an additive. Lecithin is used to emulsify brine andliquid CO2. The effect of graft copolymer was on rheology and stability of the formulated foam based fracturing fluidis evaluated as a function of surfactant concentration. The results are compared with the conventional foam basedfracturing fluids. The results showed that grafted copolymer has increased the stability of the formulated fracturingfluid at high temperatures. Use of grafted copolymer results in higher viscosity and proppant carrying capacity whichis beneficial for HPHT fracturing conditions. The results of the core flood studies were evaluated on a shale sampleto determine its return permeability and it was comparable to non-foam based fracturing fluid.