Coefficient of Thermal Expansion of Concrete Produced with Recycled Concrete Aggregates

This study presents a comparison between the coefficient of thermal expansion (CTE) of concrete produced with natural aggregate and that of concrete produced with recycled concrete aggregate. In order to achieve this, natural aggregate concrete (NAC) specimens were produced, tested, then crushed and sieved in the laboratory to obtain recycled concrete aggregates, which was then used in the production of recycled aggregate concrete (RAC) specimens. The RAC samples were then tested and compared to the NAC samples. The CTE testing was carried out using a AFTC2 CTE measurement system produced by Pine Instrument Company. In addition to CTE testing, the water absorption, specific gravity, and unit weight of the aggregates was determined. A vacuum impregnation procedure was used for the water absorption test. The recycled aggregate properties showed a significantly higher absorption capacity than that of the natural aggregates, while the unit weight and specific gravity of the recycled aggregate were lower than that of the natural aggregates. The average CTE results showed that both the NAC and the RAC samples expanded similarly. The results show that the CTE of RAC depends on the natural aggregate used in the NAC, which was recycled to produce the RAC. Also, there was no significant difference between the average CTE values of the RAC and that of NAC that could discredit the use of recycled aggregate in concrete.