Open AccessОПТИМІЗАЦІЯ КОНСТРУКЦІЇ ФАКЕЛЬНОГО ЗАПАЛЬНИКА ГТД ЧИСЕЛЬНИМ МЕТОДОМ
Author(s) -
Юрій Іванович Торба,
Д. В. Павленко,
Ярослав Викторович Двирник
Publication year - 2020
Publication title -
avacìjno-kosmìčna tehnìka ì tehnologìâ/avìacìjno-kosmìčna tehnìka ta tehnologìâ
Language(s) - English
Resource type - Journals
eISSN - 2663-2217
pISSN - 1727-7337
DOI - 10.32620/aktt.2020.5.11
Subject(s) - combustion , mechanics , combustion chamber , body orifice , turbine , materials science , mechanical engineering , automotive engineering , nuclear engineering , engineering , chemistry , physics , organic chemistry
Solved the problem of gas-turbine engine combustion chamber flame igniter efficiency increasing by increasing the flame temperature via optimizing the body design. To determine the influence of the igniter body various geometric parameters, affecting the formation and combustion of the fuel-air mixture, a parametric model was developed. This model together with the developed project in the ANSYS Workbench software package made it possible to automate the modeling process. The influence of the geometric parameters of the igniter body and external factors on the average flame temperature has been studied via a numerical model of the stationary combustion process of the air-fuel mixture formed inside the igniter of the combustion chamber of a gas turbine engine by evaporation and spraying particles of aviation kerosene in the air stream. The adequacy of the numerical simulation results was confirmed by the implementation of a series of full-scale experiments using the Fisher criterion.The uniformity of temperature and adequacy of the average temperature estimation algorithm was established using the correlation analysis of the results of measured temperature at various points of the flame. To determine the degree and nature of their influence, sequentially screening (fractional), as well as full-factor experiments with varying factors at two and three levels were implemented. Based on the results of the analysis of variance, the most statistically significant factors were selected. A regression dependence was established that relates the diameter of the air inlet orifice and the air pressure drop to the flame temperature. A qualitative and quantitative assessment of the influence of the considered factors on the process of formation of a hot air mixture and its combustion has been performed. The optimal values of the geometric parameters of the igniter body and its operating conditions are determined under which the maximum flame temperature at the stationary combustion stage is ensured. Relationships between design features, igniter operation mode, and the temperature of the flame are established. This allows expanding the range of stable ignition of gas turbine engine combustion chambers in accordance with the design of the igniter, the starting fuel supply mode, and the air pressure drop.