Open AccessOzone removal efficiency of the KI-denuder in the carbonyl sampling
Author(s) -
Huy Huu Duong,
Vui Thi Kim Tran,
Chuong Thanh Nguyen,
Hien Thi To
Publication year - 2019
Publication title -
khoa học và công nghệ: tự nhiên
Language(s) - English
Resource type - Journals
ISSN - 2588-106X
DOI - 10.32508/stdjns.v2i5.791
Subject(s) - ozone , scrubber , chemistry , wet scrubber , sampling (signal processing) , humidity , cartridge , environmental chemistry , relative humidity , volumetric flow rate , volatile organic compound , analytical chemistry (journal) , meteorology , organic chemistry , materials science , filter (signal processing) , computer vision , quantum mechanics , physics , computer science , metallurgy
In the carbonyl sampling of 2, 4- dinitrophenylhydrazine (DNPH) impregnated cartridge, the ozone removal was necessary because ozone reacted with the DNPH derivatives. A commercial ozone scrubber was usually used to remove O3. However, high humidity leaded to carbonyl compounds being trapped on the ozone scrubber before passing through the DNPH cartridge. The purpose of this study was to assess the ozone removal by KI-denuder under the climatic conditions of Ho Chi Minh City. Several parameters including air sampling flow rate and denuder length were optimized to achieve the highest removal efficiency. The optimum parameters of the KI denuder were the sampling flow rate of less than 1 L/min, and the denuder length of 20 cm. The effect of the initial O3 concentration on the removal efficiency was also investigated. Finally, the ozone removal efficiency of KI-denuder was compared to that of ozone scrubber when two devices were applied for the carbonyl sampling during field measurement. The results show that KI-denuder could be used to replace the ozone scrubber with high removal efficiency, particularly in high humidity condition. In conclusion, KI-denuder was effective, simple, easy to use and cheap. Therefore, it was encouraged to use in carbonyl sampling.