Open AccessDetermining the material model at elevated temperatures with different strain rates and simulating the warm forming process for Mg alloy AZ31B sheet
Author(s) -
Thanh-Dat Truong,
Long Thanh Nguyễn,
Binh Nguyen Thanh Vu,
Hien Thai Nguyen
Publication year - 2015
Publication title -
khoa học công nghệ
Language(s) - English
Resource type - Journals
ISSN - 1859-0128
DOI - 10.32508/stdj.v18i2.1087
Subject(s) - formability , materials science , constitutive equation , magnesium alloy , metallurgy , alloy , ductility (earth science) , ultimate tensile strength , strain rate , yield (engineering) , superplasticity , composite material , finite element method , structural engineering , engineering , creep
Magnesium alloy is one of lightweight alloys has been studied more extensively today. Because weight reduction while maintaining functional requirements is one of the major goals in industries in order to save materials, energy and costs, etc. Its density is about 2/3 of aluminum and 1/4 of steel.The material used in this study is commercial AZ31B magnesium alloy sheet which includes 3% Al and 1% Zn. However, due to HCP (Hexagonal Close Packed) crystal structure, magnesium alloy has limited ductility and poor formability at room temperature. But its ductility and formability will be improved clearly at elevated temperature. From the data of tensile testing, the constitutive equations of AZ31B was approximated using the Ramgberg-Osgood model with temperature dependent parameters to fit in the experiment results in tensile test. Yield locus are also drawn in plane stress σ1- σ2 with different yield criteria such as Hill48, Drucker Prager, Logan Hosford, Y. W. Yoon 2013 and particular Barlat 2000 criteria with temperature dependent parameters. Applying these constitutive equations were determined at various temperatures and different strain rates, the finite element simulation stamping process for AZ31B alloy sheet by software PAM- STAMP 2G 2012, to verify the model materials and the constitutive equations.