Study of the process of rolling steel balls in skew rolling mill – metallographic analysis

This paper presents the results of metallographic research studies carried out for stock materials as well as the samples collected from the balls formed in the rolling process in a skew rolling mill. The stock material was bearing steel 100Cr6 and the steel from rail scrap. The rolling process was carried out in parallel for the two assumptions: the conventional method (hereinafter referred to as conventional rolling) and the modified method (hereinafter referred to as modified rolling). After the rolling process, three cooling media were used: air, water and oil. The pictures below, which depict microstructures, were taken using the bright-field and the dark-field microscopy technique, the samples were etched with a 4% solution of picral.