DETERMINATION OF THE INPUT PARAMETERS OF THE WORK-STREAM OF THE OIL-GAS EJETOR USED SIMULTANEOUSLY WITH THE SUCKER-ROD PUMP

In order to calculate the working mode of a sucker-rod pump driven by the beam pumping unit and a jet pump during their simultaneous operation, pressure and temperature distribution along the wellbore from the bottom to the wellhead is determined for the real oil well 753-D "Dolynanaftogaz" Field Office. To calculate these parameters an improved methodology based on known Poettmann-Carpenter and Baxendel methods is used. As a result, the imperfection of these methods was eliminated, namely the assumption that pressure and temperature behavior along the wellbore is linear. This led to obtaining results which are up to 23% more accurate. In addition, using the algorithm for determining the density of perfect (ideal) liquid-gas mixture, the author has calculated the velocities of gas-water-oil and water-oil mixtures for a number of sections along the production tubing at different angles of the crank position in the beam pumping unit. The indicated values make it possible to determine the depth of the oilgas jet pump location in the well, and, consequently, the parameters at its input (pressure, temperature, velocity of the liquid-gas mixture, its density, etc.). Besides, the author studies the dependence which describes the behavior of the liquid-gas mixture density along the wellbore, as well as the relations between the density of the free oil gas, thevolumetric consumption gas content of the flow and the placement of the section under consideration. All of the above-mentioned algorithms were implemented using developed computer programs. The obtained results give a possibility to choose the location of the jet pump in the well which is the most advantageous one for ensuring maximum pressure reduction and the decrease in the stem load.