Open AccessRATIONALE FOR THE USE OF DOUBLE SHOULDER THREADED CONNECTIONS OF HOLLOW SUCKER RODS
Author(s) -
V. Kopey,
Oleh Onysko,
Yu. Yu. Zhyhuts
Publication year - 2019
Publication title -
naukovij vìsnik ìvano-frankìvsʹkogo nacìonalʹnogo tehnìčnogo unìversitetu nafti ì gazu
Language(s) - English
Resource type - Journals
eISSN - 2415-3524
pISSN - 1993-9965
DOI - 10.31471/1993-9965-2019-1(46)-7-15
Subject(s) - torsion (gastropod) , structural engineering , finite element method , rod , thread (computing) , flange , arch , sucker rod , stress concentration , materials science , engineering , composite material , mechanical engineering , surgery , medicine , alternative medicine , pathology
Frequent failures of standard threaded connections of hollow sucker rods are caused by their fatigue failures, self-loosening and leakages. This is mainly caused by such design flaws as unequal load on threads, insufficient shoulder area, stress concentration in the groove, low resistance to bending and torsion loads. Using iterative design, based on parametric geometric modeling and the finite element method, the feasibility of using double shoulder threaded connections for hollow sucker rods has been proved and their design has been improved. The improved connection has two shoulders, modified grooves with an elliptical profile, correction of the first turn of the nipple thread and optimal values of interferences. Due to this, the joint has greater tightness, strength at bending, torsion and compression, higher resistance to self-loosening, more equal load on the threads and greater fatigue strength compared to the standard one. The value of the fatigue safety factor in the area of the first turn of the nipple thread is increased by 13...14, in the area of the last turn of the coupling – by 2.6...4, in the area of the nipple groove by 0…0.4. The use of an elastic element on an additional shoulder allowed increasing the tolerance of the interference on it to 0.2 mm, making it unnecessary to control dimensions before screwing. Even after damage to the elastic part and loss of tension on an additional shoulder, the connection has greater strength than the standard one. In case of rod repairs, improved nipples can be easily implemented by welding them to the rod body. There is also the possibility of implementation of double shoulder cylindrical connections without modifying the standard nipple.