Open AccessSPOT WELDING COPPER–1%Cr ELECTRODE TIPS PRODUCED VIA EQUAL CHANNEL ANGULAR PRESSING
Author(s) -
Luay Bakir Hussain,
Ali Abadi Aljubori,
Mohamad M Gebril,
NUrulakmal Mohammed Sharif
Publication year - 2010
Publication title -
iium engineering journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.141
H-Index - 6
eISSN - 2289-7860
pISSN - 1511-788X
DOI - 10.31436/iiumej.v9i2.96
Subject(s) - materials science , pressing , copper , electrode , metallurgy , spot welding , welding , alloy , plasticine , composite material , chemistry , petrology , geology
A sharp 120o Equal channel angular pressing (ECAP) following rout Bc was applied at room temperature to refine the grains sizes of pure copper and copper-1%Chromium alloy for spot welding electrode tips application. Initially deformation behavior was investigated with the position using colorful plasticine as work piece followed by copper alloy. It was found the deformation at the central part of the work piece is heavily sheared than the outer part. Optical and Scanning electron microscopy were used to study the progress of grain refining under the influence of rotation and number of passes during pressing. The influnece of elongated fibrous nano graines on electrical conductivity and hardness were discussed. Shear test of spot welded 303 stainless steel indicated that nano structural Cu-1%Cr electrode tips used showed a superior results compared to commercial electrodes