Flow fields of a non-Newtonian fluid in vortex chamber pumps

Problem. Pumping different fluids by hydraulic transport is associated with fast wear of the pump contact surfaces. The fluids being pumped are often non-Newtonian. The use of jet pumps for pumping is impractical due to low efficiency. Vortex chamber pumps may have higher efficiency when pumping non-Newtonian fluids, however, their operation on such fluids has not yet been studied. The aim of this work is to study the characteristics of the flow fields of a non-Newtonian fluid using the example of a Bingham fluid in the vortex chamber pump. Methodology. Predicting pump energy performance and determining flow fields for highly viscous fluids using CFD simulations enables advanced jet pumps to handle non-Newtonian fluids. Results. Modeling was carried out based on the numerical solution of the RANS equations with the SST turbulence model. To ensure the operability of the vortex chamber pump when pumping non-Newtonian fluid, with known rheological parameters of the mixture, it is necessary to select the required supply pressure for the active flow, and also to consider the issue of diluting the liquid with water to reduce the mixture viscosity and achieve the specified values of the pumping energy parameters. Originality. The hypothesis that the vortex chamber supercharger can operate on a hypothetical ideal fluid has been confirmed. In this case, the performance indicators of such a supercharger improve and tend to ideal. With an increase in plastic viscosity, the volumetric flow rate of the pumped fluid decreases, and at high values of the viscosity, an active flow is ejected through the axial channels. Practical value. Researchers can use the theoretical results of this work to design new devices for pumping other Bingham fluids, such as oil paint, resins, varnishes, swamp soils, and many others.