Open Access∝-Ferrite Suppression during Fiber Laser Welding of Al-Si Coated 22MnB5 Press-Hardened Steel
Author(s) -
M. Shehryar Khan,
E. Biro,
Yunshan Zhou,
A. Macwan
Publication year - 2021
Publication title -
welding journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.27
H-Index - 71
eISSN - 2689-0445
pISSN - 0043-2296
DOI - 10.29391/2021.100.018
Subject(s) - welding , materials science , laser beam welding , coating , ferrite (magnet) , metallurgy , composite material
During laser welding of an Al-Si coated 22MnB5 steel to produce tailor-welded blanks, the Al-Si coating mixes into the weld and causes the formation of the lower strength ferrite phase dispersed in an otherwise martensitic matrix. It has been shown that the presence of the ferrite phase is the principal reason for premature failure of hot-stamped laser-welded joints. Currently, the Al-Si coating is removed prior to welding, which can be time consuming. This work showed that adding Ni to the fusion zone of laser welded Al-Si coated 22MnB5 steel by welding through a pure Ni coating of a specified thickness, ferrite formation can be suppressed, whereby improving the weld strength and successfully shifting failure from the fusion zone, where it normally occurs, to the base material to achieve 100%joint strength. This work also showed that laser welding Al-Si coated 22MnB5 steel through a Ni coating eliminated the need to mechanically or chemically remove the Al-Si coating prior to welding.