Open AccessSafety assessment of the process Verdeco Recycling, based on PET direct iV + technology, used to recycle post‐consumer PET into food contact materials
Author(s) -
Lambré Claude,
Barat Baviera José Manuel,
Bolognesi Claudia,
Chesson Andrew,
Cocconcelli Pier Sandro,
Crebelli Riccardo,
Gott David Michael,
Grob Konrad,
Mengelers Marcel,
Mortensen Alicja,
Rivière Gilles,
Steffensen IngerLise,
Tlustos Christina,
Van Loveren Henk,
Vernis Laurence,
Zorn Holger,
Dudler Vincent,
Milana Maria Rosaria,
Papaspyrides Constantine,
Tavares Poças Maria de Fátima,
Comandella Daniele,
Lampi Evgenia
Publication year - 2022
Publication title -
efsa journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.076
H-Index - 97
ISSN - 1831-4732
DOI - 10.2903/j.efsa.2022.7472
Subject(s) - food contact materials , materials science , food packaging , human decontamination , pet food , pellets , environmental science , waste management , extrusion , pulp and paper industry , process engineering , composite material , food science , chemistry , engineering
The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process Verdeco Recycling (EU register number RECYC241), which uses the Starlinger PET direct iV+ technology. The input is hot caustic washed and dried poly(ethylene terephthalate) (PET) flakes mainly originating from collected post‐consumer PET containers, with no more than 5% PET from non‐food consumer applications. The flakes are extruded to pellets, which are then crystallised, preheated and treated in a solid‐state polycondensation (SSP) reactor. Having examined the challenge test provided, the Panel concluded that the three steps, extrusion, crystallisation and SSP, are critical in determining the decontamination efficiency of the process. The operating parameters to control the performance of these critical steps are temperature, gas flow, pressure and residence time. The challenge test demonstrated that this recycling process is able to ensure that the level of migration of potential unknown contaminants into food is below the conservatively modelled migration of 0.1 μg/kg food. Therefore, the Panel concluded that the recycled PET obtained from this process is not of safety concern, when used at up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs for long‐term storage at room temperature, with or without hotfill. The final articles made of this recycled PET are not intended to be used in microwave or conventional ovens and such uses are not covered by this evaluation.