Open AccessSafety assessment of the process EREMA, based on EREMA MPR + DS technology, used to recycle post‐consumer PET into food contact materials
Author(s) -
Lambré Claude,
Barat Baviera José Manuel,
Bolognesi Claudia,
Chesson Andrew,
Cocconcelli Pier Sandro,
Crebelli Riccardo,
Gott David Michael,
Grob Konrad,
Mengelers Marcel,
Mortensen Alicja,
Rivière Gilles,
Steffensen IngerLise,
Tlustos Christina,
Van Loveren Henk,
Vernis Laurence,
Zorn Holger,
Dudler Vincent,
Milana Maria Rosaria,
Papaspyrides Constantine,
Tavares Poças Maria de Fátima,
Volk Katharina,
Lampi Evgenia
Publication year - 2022
Publication title -
efsa journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.076
H-Index - 97
ISSN - 1831-4732
DOI - 10.2903/j.efsa.2022.7379
Subject(s) - food contact materials , human decontamination , environmental science , food packaging , pet food , residence time (fluid dynamics) , waste management , materials science , pulp and paper industry , process engineering , food science , chemistry , engineering , geotechnical engineering
The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process EREMA (EU register number RECYC205), which uses the EREMA MPR + DS technology. The input material is hot caustic washed and dried poly(ethylene terephthalate) (PET) flakes originating from collected post‐consumer PET containers, including no more than 5% PET from non‐food consumer applications. The flakes are heated in a reactor under vacuum before being extruded. Having examined the challenge test provided, the Panel concluded that the reactor (step 2) and the extruder (step 3) are critical in determining the decontamination efficiency. The operating parameters to control the performance of these steps are temperature, pressure and residence time. It was demonstrated that this recycling process is able to ensure a level of migration of potential unknown contaminants into food below the conservatively modelled migration of 0.1 μg/kg food, derived from the exposure scenario for infants when such recycled PET is used at up to 100%. Therefore, the Panel concluded that the recycled PET obtained from this process is not considered to be of safety concern when used at up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs, including drinking water, for long‐term storage at room temperature. Articles made of this recycled PET are not intended to be used in microwave and conventional ovens and such uses are not covered by this evaluation.