Scientific Opinion on the safety assessment of the process “CPR Superclean PET” used to recycle post‐consumer PET into food contact materials

This scientific opinion of the EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids deals with the safety assessment of the recycling process CPR Superclean PET (EU register number RECYC002) The input of the process is hot caustic washed and dried PET flakes originating from collected post‐consumer PET containers, mainly bottles, containing no more than 5 % of PET from non‐food consumer applications. Through this process, washed and dried flakes are extruded under vacuum and pelletised. The pellets are crystallised and solid state polymerised (SSP) in a reactor at high temperature under vacuum. Having examined the challenge test provided, the Panel concluded that the three steps, the decontamination in the drying drum and extruder (step 2), the crystallisation (step 3) and the decontamination in the SSP reactor (step 4) are the critical steps for the decontamination efficiency of the process. The operating parameters to control their performance are the temperature, the pressure and the residence time for the drying drum and extrusion (step 2), the crystallisation (step 3) and the SSP (step 4). The operating parameters of these steps in the process are at least as severe as those obtained from the challenge test. Under these conditions, it was demonstrated that the recycling process is able to ensure that the level of migration of potential unknown contaminants into food is below a conservatively modelled migration of 0.1 μg/kg food. Therefore the Panel concluded that the recycled PET obtained from this process intended to be used at up to 100 % for the manufacture of materials and articles for contact with all types of foodstuffs for long term storage at room temperature, with or without hotfill is not considered of safety concern.