Open AccessUsing the roller threshing device for threshing fiber flax
Author(s) -
Yu. V. Burlakov
Publication year - 2020
Publication title -
sibirskij vestnik selʹskohozâjstvennoj nauki
Language(s) - English
Resource type - Journals
eISSN - 2658-462X
pISSN - 0370-8799
DOI - 10.26898/0370-8799-2020-6-13
Subject(s) - threshing , agricultural engineering , combing , fiber , carding , heap (data structure) , mathematics , engineering , materials science , horticulture , composite material , mechanical engineering , biology , algorithm
The ways of increasing efficiency of the factory technology for harvesting fiber flax with threshing stem band from the rolls were studied. The experiment was carried out in stationary conditions with a moisture content of the source material of no more than 16%. A roller threshing device was proposed for separating the seed part of the crop from the stem before feeding stems into the fiber production line. The device ensures threshing of the fiber flax stem band over its entire width without using a separate clamping conveyor. The places where the seed heap descends from the roller threshing device while threshing flax stem band were identified. Quality indicators of the roller threshing device operation were obtained ensuring 100% threshing of the fiber flax band with a band compression force between the rollers of 16 kN. With this method of threshing, damage and crushing of seeds were not noted, the stems were evenly flattened along their entire length. Fractional composition of the threshed heap was determined during threshing of a fiber flax stem band between the rolls of the laboratory sample of a three-roll threshing device: loose seeds (50%), shells of capsules with fruitstalks (47), capsules with seeds (3), heap of leaves and stems (less than 1%). The results of the study in stationary conditions showed the expediency of using roller working bodies to separate the seed part of the crop from the stem part for the technical support of the factory technology for harvesting fiber flax. The use of roller working bodies in the design of threshing devices without a separate clamping conveyor allows to increase the quality and quantity of flax products obtained both in seeds and in fiber due to the improvement of the process of gentle flattening of the stem band between the rollers along its entire width. The concept of this roller threshing device is advisable to use when designing trailers and travelling flax harvesting machines for the implementation of a separate technology for harvesting fiber flax.