Open AccessCharacterization of Mishrif Formation Reservoir in Amara Oil Field, Southeast Iraq, Using Geophysical Well-logging
Author(s) -
Asmaa Talal Fadel,
Madhat E. Nasser
Publication year - 2021
Publication title -
iraqi journal of science
Language(s) - English
Resource type - Journals
eISSN - 2312-1637
pISSN - 0067-2904
DOI - 10.24996/ijs.2021.62.12.11
Subject(s) - petrophysics , well logging , geology , porosity , lithology , saturation (graph theory) , formation evaluation , oil field , electrical resistivity and conductivity , mineralogy , reservoir modeling , oil shale , petroleum reservoir , petrology , petroleum engineering , geotechnical engineering , paleontology , mathematics , engineering , combinatorics , electrical engineering
Reservoir characterization requires reliable knowledge of certain fundamental properties of the reservoir. These properties can be defined or at least inferred by log measurements, including porosity, resistivity, volume of shale, lithology, water saturation, and permeability of oil or gas. The current research is an estimate of the reservoir characteristics of Mishrif Formation in Amara Oil Field, particularly well AM-1, in south eastern Iraq. Mishrif Formation (Cenomanin-Early Touronin) is considered as the prime reservoir in Amara Oil Field. The Formation is divided into three reservoir units (MA, MB, MC). The unit MB is divided into two secondary units (MB1, MB2) while the unit MC is also divided into two secondary units (MC1, MC2). Using Geoframe software, the available well log images (sonic, density, neutron, gamma ray, spontaneous potential, and resistivity logs) were digitized and updated. Petrophysical properties, such as porosity, saturation of water, saturation of hydrocarbon, etc. were calculated and explained. The total porosity was measured using the density and neutron log, and then corrected to measure the effective porosity by the volume content of clay. Neutron -density cross-plot showed that Mishrif Formation lithology consists predominantly of limestone. The reservoir water resistivity (Rw) values of the Formation were calculated using Pickett-Plot method.