METHOD OF SAMPLE MANUFACTURING FROM MULTILAYER COMPOSITE MATERIALS FOR STUDYING THEIR MECHANICAL PROPERTIES

In the last decades there is increasing the need to apply polymer composite materials in different industries, particularly in shipbuilding. There are developing single structures made from polymer composite materials to be used on board ships. The article focuses on technology of manufacturing slabs from polymer composite materials to carry out mechanical testing in the laboratory special standard units. Mechanical properties of polymer composite materials depend on molding technologies. There has been described a technology of sample manufacturing from polymer composite materials reinforced with glass fiber mat with fiberglass plastics. The technique of testing the specified samples for tensile strength has been considered. The sizes and shapes of the samples as well as the technological parameters of the manufacturing process have been validated, depending on the standard requirements and the technological features of the testing machine. The physical and mechanical properties of the components that make up the composite materials are considered. The sequence of stacking layers for preparation of plates from composite materials is indicated. The dimensions of the plates for cutting out finished samples are determined, depending on the method of production. The way of laying plates from composite materials has been chosen on the base of economic considerations and conditions of accessibility. The obtained results of mechanical properties can be used in solving problems of application of polymer composite materials in shipbuilding, for example, in manufacturing superstructures of some dry cargo vessels.