Open AccessOptimization and application of temperature field in rapid heat cycling molding
Author(s) -
Mingliang Hao,
Haimei Li
Publication year - 2022
Publication title -
thermal science/thermal science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.339
H-Index - 43
eISSN - 2334-7163
pISSN - 0354-9836
DOI - 10.2298/tsci210606291h
Subject(s) - mold , materials science , molding (decorative) , composite material , thermal , transfer molding , temperature cycling , mechanical engineering , physics , meteorology , engineering
The rapid thermal cycle molding (RHCM) belongs to the injection mold temperature control system which is helpful to improve mold ability and enhance part quality. Despite many available literatures, RHCM does not represent a well-developed area of practice. The challenge is the uneven distribution of temperature in the cavity after heating, which mostly leads to defects on the surface of the products. In order to obtain uniform cavity surface temperature distribution of RHCM, the power of heating rods of the electric-heating system in an injection mold was optimized by the response surface method(RSM) in this work. The proposed optimization result was applied to design a complex RHCM injection mold with side core-pulling, holes and different thickness of an automotive part to verify its effectiveness by injection molding. Compared with initial design, the mold temperature uniformity was remarkably improvedby79%. Based on the optimization and injection molding numerical simulation results, the workable molding process to weaken the weld-lines effects on the quality was suggested and the practical injection molded parts were well produced.