Open AccessThermal conductivity analysis of Al2O3/water-ethylene glycol nanofluid by using factorial design of experiments in a natural convection heat transfer apparatus
Author(s) -
Srinivasan Manikandan Periasamy,
Nesakumar Dharmakkan,
Sri Vishnu,
Hari Prasath,
Ramaraj Gogul
Publication year - 2021
Publication title -
hemijska industrija
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.147
H-Index - 19
eISSN - 2217-7426
pISSN - 0367-598X
DOI - 10.2298/hemind210520031s
Subject(s) - nanofluid , ethylene glycol , thermal conductivity , materials science , heat transfer , volume (thermodynamics) , factorial experiment , thermodynamics , heat transfer coefficient , heat exchanger , chemical engineering , composite material , mathematics , statistics , physics , engineering
Thermal conductivity of a heat transfer fluid plays a significant role in improving the heat transfer performance of a heat exchanger. In this work, experiments were performed in a natural convection heat transfer apparatus by mixing homogenized Al2O3 nanoparticles in a base fluid of water-ethylene glycol mixtures. The effects of heat input, nanoparticle volume content in the base fluid, and ethylene-glycol volume content in the base fluid on thermal conductivity of the nanofluid were analyzed. Based on results obtained by MINITAB? design software (factorial design matrix), 16 experimental runs were performed with the lower and higher levels of input factors. The levels for heat input were 10 and 100 W; for nanoparticle volume content in the base fluid 0.1 and 1 vol.% and for the base fluid composition 30 and 50 vol.% of ethylene glycol in water. From the obtained experimental results, a Pareto chart, normal probability plot, contour plot and surface plot were drawn. Based on the results, a new correlation was proposed, and predictions were compared with the experimental results. From the study, the maximum thermal conductivity value 0.49 W m-1 K-1 was observed at a nanoparticle volume content in the base fluid of 1.0 vol.%, ethylene glycol volume content in the base fluid of 30 vol.% and heat input of 100 W.