Open AccessThe improvement of the edge screw connection in OSB and conventional particleboard
Author(s) -
M. Popović,
Milanka Djiporović-Momčilović,
Jovan Miljković,
Ivana Gavrilović-Grmuša
Publication year - 2006
Publication title -
glasnik šumarskog fakulteta - univerzitet u beogradu/glasnik šumarskog fakulteta
Language(s) - English
Resource type - Journals
eISSN - 2217-8600
pISSN - 0353-4537
DOI - 10.2298/gsf0694257p
Subject(s) - embedment , materials science , adhesive , oriented strand board , composite material , enhanced data rates for gsm evolution , engineering , layer (electronics) , telecommunications
This work presents the method for improvement of direct screw connection performance in conventional particleboard (PB) and oriented strand board (OSB). It is conceived on adhesive insertion into the pilot hole prior to embedment of the screw. The tests were carried out on the PB and OSB, both presenting interior boards and with the same nominal thickness of 18 mm. Particleboard screws of the 5 mm in diameter were inserted in the edge of the board. Pilot hole diameters were 2,5 mm and 3,0 mm and the depth of embedment was 30 mm for all tests. The chosen PVAc adhesive (type 3) with the addition of wood flour as consolidator in the range from 3-10% was inserted into pilot-hole. Tests were also obtained after consequent reassembly of the screw connection in order to examine the ratio of loss in withdrawal forces in such case. It was found that the insertion of PVAc adhesive into the pilot hole and the addition of wood flour have the positive effects on the screw withdrawal force in the tested boards