Open AccessMeningkatkan Mutu Produk Plastik Dengan Metode Taguchi
Author(s) -
Moh. Hartono
Publication year - 2012
Publication title -
jurnal teknik industri
Language(s) - English
Resource type - Journals
eISSN - 2527-4112
pISSN - 1978-1431
DOI - 10.22219/jtiumm.vol13.no1.93-100
Subject(s) - taguchi methods , plastic waste , ultimate tensile strength , materials science , orthogonal array , composite material , pulp and paper industry , waste management , environmental science , engineering
Plastic waste is one type of waste that can not be broken down into the organic waste. Utilization of waste plastics to berecycled into plastic with better quality are rarely implemented. This study aims to utilize plastic waste in order to improve the quality of plastic products by Taguchi experimental design method that combines the pure plastic material composition of ore and recycled plastic (type PP/Polypropilena) with a certain pressure and temperature to produce a tensile strength of the plastic the better. From the experimental results, obtained by a combination of material composition of 30% recycled plastic, the pressure of 6.5 atm and a temperature of 180 °C. The composition obtained by the average tensile strength of 991.667 Newton, and Signal to Noise ratio (Larger is better) by 59, 9255. Statistically, tur ulang he combination was significantly affected by alpha at 0:05 Taguchi method through experiments with a matrix orthogonal array L8 (23).