Design and Analysis of Parison Blow Molding Using Adaptive Mesh

Blow Molding is one of the most versatile and economical process available for molding hollow materials. When polyethylene is stretched, it exhibits strain-hardening properties, which are temperature, pressure, velocity and strain-rate dependent. In this paper, preform is made by extrusion and forced between two halves by pressurization. This process includes isothermal and transient flow of Newtonian fluid in complex geometries simultaneous with structuring and solidification. A time dependent problem is defined and setting material properties and boundaries condition for bottle blow molding. Numerical data available in POLYDATA for a time dependent problem using ANSYS POLYFLOW were applied. Results display in form contours associated with different variables at different time steps and good agreement with the bottle thickness profile is observed. In this paper, the analysis of the stretch-blow molding (SBM) process of polyethylene terephthalate (PET), parison plastic bottles is studied by the finite element method (FEM). A hyper elastic constitutive behavior was calibrated using material data available in literature in variant high temperatures and strain rates and was used in the numerical simulation. Hydrostatic pressure with convention heat transfer has been used instead of a blowing process. Comparisons of numerical results with experimental observations demonstrate that the model can predict an overall trend of thickness distribution. Through the study, it becomes clear that the proposed model is applicable for simulating the stretch-blow molding process of PET bottles, and is capable of offering helpful knowledge in the production of bottles and the design of an optimum preform.