Open AccessПороги инициирования и динамические характеристики взрыва для тонких образцов композитов ТЭН-Al при лазерном воздействии
Author(s) -
Б.П. Адуев,
Д.Р. Нурмухаметов,
Н.В. Нелюбина,
И.Ю. Лисков
Publication year - 2019
Publication title -
žurnal tehničeskoj fiziki
Language(s) - English
Resource type - Journals
eISSN - 1726-748X
pISSN - 0044-4642
DOI - 10.21883/jtf.2019.06.47640.308-18
Subject(s) - explosive material , decomposition , shock wave , analytical chemistry (journal) , amplitude , materials science , aluminium , shock (circulatory) , range (aeronautics) , chemistry , thermodynamics , optics , metallurgy , composite material , physics , chromatography , medicine , organic chemistry
In this paper, we measured thresholds H _cr of explosive decomposition of thin ( h = 1 mm) samples of PETN-Al composites with densities in the range of ρ = 0.9–1.7 g/cm^3 and variations in the concentration of aluminum inclusions in the range of 0.025–1.0 wt % upon exposure to pulses of a neodymium laser (λ = 1064 nm, 14 ns). For each ρ, inclusion concentrations n _opt, at which the threshold for explosive decomposition of H _cr is minimal, are obtained. The velocities of air shock waves (ASWs) were determined depending on sample density ρ, and the times of the start of explosive decomposition were determined depending on the inclusion concentration. The amplitude (in relative units) and time shift of the maximal pressure of an ASW at the piezodetector are determined depending on sample density. It is concluded that the explosion is governed by the SW mechanism at high densities. As sample ρ decreases, the completeness of the explosion increases, with the most likely mechanism for small ρ being explosive burning. The efficiency of explosive decomposition is higher for samples with lower densities.