Open AccessВлияние высоких давлений на формирование новых соединений в сплаве Al-=SUB=-86-=/SUB=-Ni-=SUB=-2-=/SUB=-Со-=SUB=-6-=/SUB=-Gd-=SUB=-6-=/SUB=--=SUP=--=SUP=-*-=/SUP=--=/SUP=-
Author(s) -
S. G. Menshikova,
V. V. Brazhkin
Publication year - 2022
Publication title -
fizika tverdogo tela
Language(s) - English
Resource type - Journals
eISSN - 1726-7498
pISSN - 0367-3294
DOI - 10.21883/ftt.2022.02.51924.32s
Subject(s) - materials science , tetragonal crystal system , alloy , eutectic system , crystallography , solid solution , electron microprobe , precipitation , homogeneous , analytical chemistry (journal) , phase (matter) , diffraction , x ray crystallography , crystal structure , scanning electron microscope , metallurgy , thermodynamics , composite material , chemistry , physics , organic chemistry , chromatography , meteorology , optics
The structure, elemental and phase composition of the eutectic alloy Al86Ni2Со6Gd6 (hereinafter referred to as at.%) During the solidification of the melt from 1500oC at a rate of 1000oC/s under high pressure of 3 and 7 GPa have been investigated by X-ray diffraction analysis and electron microscopy. Solidification of the melt under high pressure leads to a change in the phase composition of the alloy and the formation of an anomalously supersaturated solid solution of α-Al (Gd). At a pressure of 7 GPa, new phases were synthesized: Al3Gd * (like Al3U) containing Co and Ni, with a primitive cube structure (cP4/2) with a lattice parameter a = 4.285 ± 0.002 Angstrem and Al8Co4Gd * (like Al8Cr4Gd) with a tetragonal structure (tI26/1) with parameters a = 8.906 ± 0.003 Angstrem and c = 5.150 ± 0.003 Angstrem. The structure of all the samples obtained is homogeneous, dense, finely dispersed, without shrinkage cavities and pores. The average microhardness of the samples is high due to solid solution and precipitation hardening.