Open AccessTHE STUDY OF POROSITY OF SINTERED SAMPLES OF COBALT-CHROMIUM ELECTROEROSION POWDERS
Author(s) -
Е. В. Агеева,
A. Yu. Altukhov,
А. А. Сысоев,
A. S. Osminina
Publication year - 2017
Publication title -
izvestiâ ûgo-zapadnogo gosudarstvennogo universiteta
Language(s) - English
Resource type - Journals
eISSN - 2686-6757
pISSN - 2223-1560
DOI - 10.21869/2223-1560-2017-21-6-51-59
Subject(s) - materials science , spark plasma sintering , porosity , microstructure , distilled water , cobalt , raw material , sintering , metallurgy , dispersant , dispersion (optics) , chromium , graphite , alloy , ceramic , chemical engineering , composite material , chemistry , physics , organic chemistry , chromatography , optics , engineering
One of the main requirements for powders for additive 3D technologies is the spherical shape of particles. Such particles are most densely fit into a certain space and provide the ‘fluidity’ of powder compositions in the systems of material supply with minimal resistance. In addition, the powder should contain a minimum amount of dissolved gas. The microstructure of the powder should be homogeneous and finely dispersed (with a uniform distribution of phase constituents). Based on the peculiarities of the methods of producing spherical powders in order to obtain spherical granules of regulated granularity, the electroerosion dispersion (EED) technology, which is characterized by relatively low energy costs and environmentally sound process, is proposed. The main advantage of the proposed technology is the use of waste materials as raw stuff which are much cheaper than the pure constituents used in traditional technology. In addition, this technology allows varying the granulometric composition of the resulting powder by changing electrical parameters. The objective of this work is to study the porosity of sintered samples of cobalt-chromium powders obtained for additive technologies by means of electroerosion dispersion. To implement the proposed research, wastes of the cobalt-chromium alloy of KHMS "CELLIT" grade were chosen. Distilled water and isobutyl alcohol were used as the working fluid. Electrical discharge machine to disperse conductive materials was used to produce cobalt-chromium powders. The powders are consolidated by the method of spark plasma sintering using the spark plasma sintering system SPS 25-10 (Thermal Technology, USA). The initial material was put in a graphite matrix placed under a press in a vacuum chamber. Electrodes integrated into the mechanical part of the press feed electric current to the matrix and create spark discharges between the sintered particles of the material, providing intensive interaction. The porosity was determined using Olympus GX51 optical inverted microscope with a software for quantitative image analysis. Prepared samples had no traces of structural components grinding, polishing or dying. The microsection metalographic specimen was made by the cross section (fracture) of the whole product. Based on the results of the conducted experiment aimed at studying the porosity of sintered samples from cobalt-chromium powders obtained for additive technologies by electroerosion dispersion in isobutyl alcohol, it was found that the porosity ranges from 3.19 to 6.15 %.