Stress state of the foundations of buildings and structures

Objective . Determination of the stress state of a ground base with a trapezoidal cutoff from the action of own weight, according to the conditions of equivalence of effects, is reduced to determining the stress state from the external surface load distributed according to the hydrostatic law. Methods . The problem of determining the stresses in the structure foundations at any degree of areas development of a plastic strain of the soil has a strict mathematical formulation, and similarity criteria can be obtained using a simpler construct of similarity theory. The simulation is performed by using similarity criteria based on which the model is executed, the loading conditions are determined, and the transition from the values measured on the model to the corresponding values of the full-scale structure is carried out. Similarity criteria can be obtained either with the help of similarity theory or with the help of dimensional analysis. An even greater effect of increasing the self-weight of a model made of transparent optically sensitive material can be achieved using the immersion method in conjunction with the centrifugal modeling method. If necessary, the stresses in the model area are fixed using the "freeze" method. Result . Using the equations system of the mixed problem of the elasticity and plasticity theory, and the scale method, similarity criteria are established for modeling stresses in the foundations of buildings and structures. Limitations on the choice of similarity multipliers for loose soils, the possibility of using the method of centrifugal modeling, as well as features of modeling connected soils are noted. Conclusion . A necessary condition for the similarity of the stress states of loose homogeneous bases in nature and the model is the equality of the similarity multipliers of the geometric scale and the force factor.