Premium
Influence of activated sludge flocculation time on secondary clarification
Author(s) -
Wahlberg Eric J.,
Keinath Thomas M.,
Parker Denny S.
Publication year - 1994
Publication title -
water environment research
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.356
H-Index - 73
eISSN - 1554-7531
pISSN - 1061-4303
DOI - 10.2175/wer.66.6.3
Subject(s) - flocculation , clarifier , activated sludge , mixed liquor suspended solids , effluent , chemistry , aerated lagoon , suspended solids , pulp and paper industry , settling , aeration , decantation , chromatography , waste management , environmental engineering , environmental science , sewage treatment , wastewater , engineering , organic chemistry
The success of gravity separation of activated sludge from a treated effluent depends on the flocculent nature of the mixed liquor entering the secondary clarifier. Despite its importance to the overall effectiveness of the activated sludge process, flocculation phenomena are not routinely considered in the design and operation of the process. Further optimization of the activated sludge process to meet higher performance demands requires that the competing reactions of floc aggregation and breakup be maximized and minimized, respectively. Accordingly, the goal of this study was to develop an improved understanding of activated sludge flocculation.
A theoretically based and easily performed batch flocculation procedure was developed. The procedure enabled the quantification of the flocculation characteristics of activated sludges. The procedure was field applied, testing 30 activated sludges obtained at 21 full‐scale facilities. Results obtained during the field study indicated that the equilibrium concentration of supernatant suspended solids following batch flocculation and settling is comparable for a wide variety of activated sludges regardless of the initial aggregative state of the mixed liquors or the aeration device employed. The results indicated that flocculation of activated sludge cannot be used to reduce supernatant suspended solids below a certain limit. Moreover, the results indicated that attainment of equilibrium is rapid; the activated sludge flocculation reaction in batch reactors was 99% complete within 10 minutes for all but six of the activated sludges studied. Field‐determined estimates of activated sludge flocculation characteristics can be used to predict the performance of flocculators placed either upstream of or in secondary clarifiers. These estimates also can be used to determine the impact of altering process variables on flocculation, thereby affording a procedure for optimizing an activated sludge's flocculation potential.